Cooling Hose Kit — Upper 2.00 in ID, Lower 1.53 in ID SKU: QT4667

This radiator hose kit restores steady coolant flow between the engine and radiator, helping keep working temperature in the safe zone during mowing, loader work, and field chores. Renewing both molded hoses together is a simple way to prevent leaks and downtime.

The pre-formed bends follow proper routing for a clean fit and reliable clamp sealing. Fresh rubber stands up to vibration, heat cycles, and everyday farm conditions for consistent service.

• Upper hose inside diameter: 2.00 in (50.8 mm) for a snug fit at the upper neck
• Lower hose inside diameter: 1.53 in (38.9 mm) to match the lower neck/water pump
• Molded curves maintain flow without kinking and ease installation
• Durable construction suited for routine farm use and frequent heat cycling

Installation Tip: Drain coolant below hose level, clean necks until smooth, and use new clamps. Fit and tighten the lower hose first, then the upper; refill with the correct coolant mix and bleed any trapped air after warm-up.

This kit provides a snug fit and reliable cooling performance for everyday farm work.